All Prowler Proof Diamond designs have been through the same gruelling security tests – and passed with ease. The Australian Standards security test takes a test sample through a series of 6 separate tests. All tests have to be passed in succession by the same test sample to get the stamp of approval. A severe challenge for any diamond design security screen…except Prowler Proof. Check out the results below...
Your Prowler Proof Diamond design security screens will remain corrosion-free even with a minimum of maintenance. Cleaning every six months – every three months in coastal or industrial regions – is all it takes. Security products that are held together by screws or rivets can require cleaning as often as every 2-4 weeks in coastal regions. Why the big difference? The fact that Prowler Proof is welded means that there are no untreated or raw edges to increase the risk of corrosion. And as the only security screen manufactured in a fully automated factory, Prowler Proof is powder coated AFTER the assembly. This eliminates the risk of damage to the paint during assembly. Few security screens have survived the Australian Standards 1,000 hour salt spray test. Prowler Proof went there and beyond...
All Prowler Proof Diamond design security screens come with a high quality fibreglass insect screen. But you can take it even further. Aluminium or stainless steel insect screens offer extra strength as well as protection from bushfire. With 18x30 strands per inch, a micro fibreglass insect screen will keep out even the smallest insects. And our pet safe polyester mesh is an economical solution if your pet likes to test the strength of the mesh with its claws. With Prowler Proof you can choose your own level of protection.
If you want to know more about the performance of Prowler Proof's Diamond designs, you'll find all the information you need here.
