Thanks to the way they are built, Prowler Proof products are built to last. We recommend the following care and maintenance: 

Doors and windows

As a general rule you should clean the powder coated surface at least every six months – more rigorous cleaning is required in coastal and industrial areas.*

This is how you do it:

Doors and windows

1. Carefully remove any loose deposits with a wet sponge.

2. Use a soft (non-abrasive) brush or cloth and a mild household detergent, or for the best results, use Prowler Proof's Screen Care 2 in 1 Wash & Wax Kit to remove dust, salt and other deposits. (Do not use steel wool, scrapers, scouring liquids or powders as these permanently scratch the coating surface.)

3. Rinse off with clean fresh water.

Avoid using harsh detergents as these could be harmful to the powder coated surface. Any detergent that recommends the use of gloves is likely to damage the powder coating. The damage may not be visible immediately and could take up to twelve months to appear.

Locks, hinges and rollers

1. Use a soft bristle brush or similar to clean the surface – avoid abrasive tools.

2. Clean with a diluted solution such as mild liquid detergent in warm water.

3. Ensure that cleaning fluids do not penetrate the lock cylinder.

4. Don’t allow dirt or other contaminants to build up on the surface, as these will discolour and impair the surface. Some change in colour, gloss or chalking may be expected dependent on exposure. 

Key cylinders should be lubricated annually, or when there are signs of roughness when you insert or retract the key. Remove any dirt, grime and salt deposits on and around the end of the cylinder barrel, and apply a small amount of powdered graphite to the key. Insert the key into the lock barrel to maintain a smooth action.

Basic Knowledge of Stains:
Click here to download our information guide on stains.

If living close to the ocean, a little extra care is required to protect your Prowler Proof product, like you would any other major investment. Below is a guide on how best to care for your screens if living in a coastal region. 

Environment

Description

Cleaning Interval

Mild

Not close to the ocean, e.g. rural, remote from urban and industry

Every 6 months

Moderate

Urban area, inland and away from industry

Every 2 to 3 months

Extreme

Within 10km of a coastline, being coastal/marine and subject to salt deposition, or heavy industrial areas

Every 2 to 4 weeks

Marine

Within 500m of beachfront

Every week